KLINGERSIL? C-8200
KLINGERSIL? C-8200 is a premium high-pressure gasket which offers more safety for the use with high concentrated acids.
Key features
Special acid-resistant elastomer as binder
Flame retardant binder
Benefits
Resistant to a variety of media especially acids
Improved ozone resistance
Typical technical data for thickness 2.0 mm
Compressibility ASTM F 36 J | % | 9 | |
Recovery ASTM F 36 J | % | 55 | |
KLINGER cold/hot compression | thickness decrease at 23 °C | % % | 7 15 |
Specific leakrate λ | VDI 2440 | mbar x l/s x m | 9.17E-09 |
Density | g/cm3 | 1.7 | |
Acid tests | |||
Thickness increase after fluid | HNO3, 96%, 18 h / 23 °C | % % % % % | unsuitable |
Average surface resistance | ρO | Ω | 5.8x10E11 |
Average specific volume resistance | ρD | Ω cm | 4.1x10E12 |
Average dielectric strength | Ed | kV/mm | 17.0 |
Average power factor | 50 Hz | tan δ | 0.228 |
Average dielectric coefficient | 50 Hz | εr | 9.4 |
ASME-Code sealing factors
for gasket thickness 1.0 mm | tightness class 0.1 mg / s x m | MPa | y 20 |
for gasket thickness 2.0 mm | tightness class 0.1 mg / s x m | MPa | y 20 |
for gasket thickness 3.0 mm | tightness class 0.1 mg / s x m | MPa | y 20 |
Dimensions of the standard sheets
| Sizes | 2000 x 1500 mm |
| Thicknesses | 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm |
| Tolerances | Thickness acc. to DIN 28091-1 Length ±50 mm, Width ±50 mm |
Other thicknesses, sizes and tolerances on request.
Function and durability
The performance and service life of KLINGER gaskets depend to a large extent on proper storage and fitting - factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also take note of our installation manual.